VWD
   
  Window Series «
nav lines
  Product Options
«
nav lines
  Photo Album
«
nav lines
  Dealers
«
nav lines
  Technology & Standards
«
nav lines
  Literature
«
nav lines
  What's New
«
nav lines
  People Are Talking «
nav lines
 
Please install Flash to view this content
Window Series
210 Double Hung

Download our Tech Sheet on this window

Fusion Welded Frame & Sash
Welding creates a fully sealed, continuous profile that eliminates potential air and water penetration through frame and sash corners.

Maintenance Free Solid uPVC Vinyl Profiles
The multi-chambered design provides structural strength as well as insulating air pockets which reduce heat and cold transfer

True Over-The-Sill Drainage
Our High Tech Compound-Cut and weld frame creates a sill without the need for drain holes. This eliminates any cold air return into your home found in traditional drainage systems.

Integral Lift Rail
Permits sashes to be operated with ease



Double Bond Glazing System
Flexible dual durometer seals hug the glass from both sides. The system also includes a glazing tape applied to the interior side. The result is an unprecedented barrier against air and water penetration.

Commercial Glazing Technique
Exterior glass stops, combined with Double Bond Glazing , are more effective in maintaining a well-sealed window.

High Performance Glass Options
Choose Solar Gain Low E for free solar heat or Solar Shield Low E for reducing solar heat gain. Argon and Krypton Gas fillings will maximize heat savings! Ask how E-Clean Glass uses the energy of the sun to reduce dirt on your glass! KeepSafe Glass is the laminate of choice for security, quiet and safety!

Warm Edge Spacer Technology
Only the best warm edge spacers will reduce perimeter condensation on an insulating glass unit, fight mold and increase the comfort of your home.

7/8" Overall Insulating Glass
Results in superior thermal performance. Our optional high performance triple glass has two 1/4" air spaces. With Krypton Gas and double Solar Shield Low E, this results in center glass R8.2 (.12U) value.

IGMA Approved
Certification Numbers - Stainless #2521-P, TempSmart™ #2190-0200508G



Triple Seal
Three layers of premium Fin Seal stop air and water as they reduce sound transmission. Benefit from the best sliding seals available!

Double Neoprene Bulbs
Compression style seals close tight where the sash meets the frame and sliding is not required. Our engineers insisted that you get this premium component!

Night Latch (Optional)
Provides limited ventilation and discourages unlawful entry.

Recessed Tilt Latches
Both sashes tilt in for easy cleaning from inside your home. Our recessed design maintains a clean and attractive sight line in your window.

Cam Locks
Heavy duty 180 degree locking cams pull your sashes tightly together for a great seal!

Quick Release Coil Balance
Effortless sash movement with simple sash removal.

Self Lubricating Spiral Balances
Designed to achieve smooth, effortless sash operation.

Quick Lock Shoes
When you tilt your sash for cleaning, a secure locking action from multi-directional shoe expansion break-points secures the sash in place.


 

800M Casement / 850M Awning


100M Casement / 150M Awning
210 Double Hung
300 Tilt Slider
201VS / 201VSJ Single Hung
301VS / 301VSJ Single Slider


100MR Casement / 150MR Awning
240 / 240J Double Hung
340 / 340J Tilt Slider
355 Lift Out Slider

 
     
  Copyright © 2007 Vinyl Window Designs Ltd.
info@vinylwindowdesigns.com
www.vinylwindowdesigns.com
Vinyl Window Designs Ltd.
300 Chrislea Road
Woodbridge, ON, Canada
L4L 8A8
Tel: 905-850-3222
Fax: 905-850-9940
Toll Free: 1-800-668-4820